TECNO PHANTOM 5 STOCK ROM DOWNLOAD

TECNO PHANTOM 5 STOCK ROM DOWNLOAD

    Below is the direct link to download the Tecno Phantom 5
 Firmware stock ROM (flash file) this Firmware can be use to Flash Unbrick or Upgrade Tecno Phantom 5

Take a Backup of your personal data before flashing or installing the firmware on your smartphone.
As this helps you to recover the personal data whenever any thing wrong happen.

HOW TO FLASH Tecno Phantom 5?

      The below tutorial only works with the Stock firmware or Custom Rom which comes with the Scatter file in it (basically Mediatek devices).
Take a backup of your important data before using the Smart Phone Flash Tool as because during the flashing process your personal data will be removed permanently.
Your Android Smartphone should have at-least 40-50 percent of battery to perform the Flashing Process.
Download and extract the stock firmware on your computer.

After extracting you will find the SP Flash Tool, Driver and instruction manual.

READ  iTEL 1400 Stock Rom (Pac File)

Install the USB Drivers (skip if drivers are already installed).

Open the SP Flash Tool and load the Scatter File from the firmware folder.

Connect your Smartphone to the computer using the USB Driver.

Click on Upgrade / Download Button in the SP Flash Tool to Begin the Flashing.

Green Ring will appear at the end of successful Flash.

Congratulations, Now your Android Smartphone is successfully running the Stock Rom you have Downloaded.

You Can Also Flash This Device Using SPMultiPortFlashDownloadProject
Turn off the smartphone. Cable is not connected to the computer.

 Remove the battery and insert it again

Connect your phone to a computer cable. The operating system detects a new device

READ  Tecno IN5 Firmware / Flash File Download

 Disconnect the cable from the computer.

 Run SPMultiPortFlashDownloadProject.exe

 Choose File> Open File Agent download and specify the file MTK_AllInOneDA.bin (it is in the folder SP_MDT).

Click Scatter File and select the MT6595_Android_scatter.txt file (it’s in the folder with the rom).

Click “Start all”.

 Connect your phone to a computer cable. The program should see and blink. If the phone is not detected, then unplug it from the computer,

remove and insert the battery (if the battery is removable) and reconnect it to the computer.

 After (OK) click Stop and disable any phone.

 Completed.See Detailed instruction with images On how to Use sp Flash Tool

After flashing the firmware on your Mediatek Device, you need to follow Any of the link below How to Flash / Fix Repair the IMEI on your device.
How to use MAUI META 3G to Fix Null/Invalid MTK Imei
How To Change Stubborn MTK IMEI
How To Fix/Change Mtk IMEI Without Root Access

Recommended:

You Might Also Like:


Download SP flash Tool From here
Download Spreadtrum Flashing Tool from Here
Tecno Phantom 5 STOCK ROM
PHANTOM5-H531-B1-L-20151016
Download Now

READ  WELCOME INFINIX NOTE 4 ANDROID OREO EXPERIENCE
>